Honeywell S9200U1000 Universal Integrated Furnace Control Board Module
Be the first to review this product.Product Description
The Honeywell S9200U1000 Universal Integrated Furnace Control is used to control a standard induction-type circulating fan motor.
The S9200U1000 Furnace Control Module can be used with EnviraCOM enabled Vision PRO IAQ and Focus PRO as well as conventional thermostats. Honeywell S9200U1000 is intended for use with residential natural gas or liquid propane fueled furnaces only. The S9200U1000 EnviraCOM communications capability allows it to be used in twinning applications and also enables communication with diagnostic devices, both local and remote, such as the QuickLook hand held device (QuickLook 72), the W8735D Telephone Access Module (TAM), and the EnviraLINK web based application.
Honeywell S9200U1000 Features
- Main burner ignition using a 120V hot surface igniter
- Flame rectification circuit to monitor flame presence
- Monitoring of system pressure switch, high temperature limit, and rollout functions
- Appliance operation/safety requirements controlled via microprocessor
- Control of a standard induction-type circulating fan motor (based on appliance requirements), in response to a conventional low voltage or EnviraCOM thermostat
- LED system status, performance and diagnostic indication
- Wire harnesses provided for simple replacement of most IFCs and integration with most heating and cooling appliances
- Twinning capability
- EnviraCOM communication capability to enable local and/or remote system status, diagnostics, troubleshooting, and HVAC system control
Honeywell S9200U1000 Specifications
- Line Voltage: 120Vac (97-132 VAC)
- Low Voltage: 24V (18-30 VAC)
- Frequency: 60 Hz
- Operating Temperature: -40F to +175F
- Operating Humidity Range (% RH:) 0% to 95% non-condensing
- Igniter Current: 1.0A resistive @ 95Vac output
- Thermostat Anticipator Setting: (Stage 1 only) 100mA
- PrePurge: 30 seconds
- HSI Warmup Time: 17/27 or 30/30 seconds
- Trial For Ignition: 4, 6, or 8 seconds
- PostPurge: 15 seconds
- Interpurge: 60 seconds
- Ignition Trials: Three, two tries if flame is not sensed
- Flame Failure Response Time: 2 Seconds max @ 1
The S9200U1000 Furnace Control Module can be used with EnviraCOM enabled Vision PRO IAQ and Focus PRO as well as conventional thermostats. Honeywell S9200U1000 is intended for use with residential natural gas or liquid propane fueled furnaces only. The S9200U1000 EnviraCOM communications capability allows it to be used in twinning applications and also enables communication with diagnostic devices, both local and remote, such as the QuickLook hand held device (QuickLook 72), the W8735D Telephone Access Module (TAM), and the EnviraLINK web based application.
Honeywell S9200U1000 Features
- Main burner ignition using a 120V hot surface igniter
- Flame rectification circuit to monitor flame presence
- Monitoring of system pressure switch, high temperature limit, and rollout functions
- Appliance operation/safety requirements controlled via microprocessor
- Control of a standard induction-type circulating fan motor (based on appliance requirements), in response to a conventional low voltage or EnviraCOM thermostat
- LED system status, performance and diagnostic indication
- Wire harnesses provided for simple replacement of most IFCs and integration with most heating and cooling appliances
- Twinning capability
- EnviraCOM communication capability to enable local and/or remote system status, diagnostics, troubleshooting, and HVAC system control
Honeywell S9200U1000 Specifications
- Line Voltage: 120Vac (97-132 VAC)
- Low Voltage: 24V (18-30 VAC)
- Frequency: 60 Hz
- Operating Temperature: -40F to +175F
- Operating Humidity Range (% RH:) 0% to 95% non-condensing
- Igniter Current: 1.0A resistive @ 95Vac output
- Thermostat Anticipator Setting: (Stage 1 only) 100mA
- PrePurge: 30 seconds
- HSI Warmup Time: 17/27 or 30/30 seconds
- Trial For Ignition: 4, 6, or 8 seconds
- PostPurge: 15 seconds
- Interpurge: 60 seconds
- Ignition Trials: Three, two tries if flame is not sensed
- Flame Failure Response Time: 2 Seconds max @ 1
Documents and Specifications
| Model | S9200U1000 | |
| Brand | Honeywell |
